Miniwing 1/144 Westland Wyvern S.4

The Wyvern at first blush is one of those typically weird British creations, a prop aircraft in a jet era. Its development history began during World War II with the intention of using a 24 cylinder radial engine and the first models flew in that configuration in December, 1946. A turboprop replaced the radial and that version flew in March, 1949. The aircraft entered squadron service in May, 1953 and served until April, 1958. They were most noted for their participation I the Suez Crisis in 1956.

As I said, it seems a weird creation, but certainly had it's counterparts in the US. The Ryan XF2R-1 Skyshark, the Lockheed XFV-1 Salmon, and the Convair XFY-1 Pogo all come to mind as turboprop driven, US carrier fighters. The Wyverns claim to fame is that it reached operational status and was used successfully for 5 years. It provided a prop aircraft with near jet performance, greater range, and better throttle response than the first and second generation jet fighters.

Construction of the Miniwings Wyvern S.4 is very straight forward. I won't bore you with a lot of details other than to point out the potential pitfalls and areas I thought needed extra care.

1)      Very few bubbles in the kit and those were easily fixed using Mr. Surfacer

2)      You definitely need a good 3 view drawing of the aircraft as a guide. For instance, the horizontal stabilizers have considerable dihedral and the 3 view is needed to align them. It also helped with landing gear angles and gear door placement. To learn from my experience, I glued the horizontals on flat, then had to take them off and reattach them at the proper angle. Live and learn!

3)      The jet exhausts on the side are molded flush. I used a micro rotary tool to hollow them out in my one concession to adding additional detail. Do this before adding any parts to the fuselage.

4)      The wing took some extra care to mate with the fuselage. It is slightly longer than the receiving slot. This isn't a negative - actually, it's a positive because with care you get a good tight fit requiring only minor filling. But plan to spend a little bit of time on that part of the construction.

5)      The vertical fins on the stabilizers are just slabs. I mounted them, and then sanded them to airfoil shape once they were in place.

6)      Be careful of the seat placement. It needs to be at the proper height, but not so high it interferes with the canopy.

7)      So many propeller blades...plan to spend some time on those, too.

8)      Decals went on nicely. Some print pattern that was visible on the sheet is pretty well hidden once they are applied over the base paint colors. I chose the Suez Scheme and thought the stripes worked pretty well.

I built the kit straight from the box and am very happy with the results. Some things you might consider if you're looking to make a killer model for contests:

1)      The wing cannons are too thick compared to the 3 view drawings. Remove the kit cannons and replace with finer stretched sprue or Evergreen.

2)      The kit stripes can be replaced by painting the yellow and using black stripe decals or painting both the yellow and the black stripes. Even though the decals are thin and lay down well using Future and Solveset, they still cover some of the panel lines in the wings and fuselage.

3)      Plenty of room to improve the cockpit if you're Matt Bitner and enjoy building 1/144th scale cockpit detail. [Ed. Note - Hey, wait a minute...]

4)      Plenty of little antennas that can be added if you're so inclined

5)      Rockets....The kit provides 8 underwing rockets. In my example, all 8 were broken free of their sprue and most of them were missing one or both of the mounting tabs. I chose not to add them to my model, but a little extra work could provide this additional detail.

As I said, I'm very happy with the results. I probably rushed the canopy (again!) and may remove it and try cleaning it up a bit before hitting the contest circuit (NOTE: After looking at the close-up pics, change that to "I will definitely..."). I'm also providing some pictures to show how it compares with the Miniwings Sea Fury. I was not happy with the weathering job on the Sea Fury, so I left the Wyvern clean.

That's about it, I guess. I still have most of a bottle of RAF Sky left...might I suggest a Firebrand or a Seafire 47?

Thanks to Miniwing for the review kit.